embedded

libopenstm32 - a Free Software firmware library for STM32 ARM Cortex-M3 microcontrollers

Olimex STM32-H103 eval board

I guess it's time to finally announce libopenstm32, a Free Software firmware library for STM32 ARM Cortex-M3 microcontrollers me and a few other people have been working on in recent weeks. The library is licensed under the GNU GPL, version 3 or later (yes, that's an intentional decision after some discussions we had).

The code is available via git:

 $ git clone git://libopenstm32.git.sourceforge.net/gitroot/libopenstm32/libopenstm32
 $ cd libopenstm32
 $ make

Building is done using a standard ARM gcc cross-compiler (arm-elf or arm-none-eabi for instance), see the summon-arm-toolchain script for the basic idea about how to build one.

The current status of the library is listed in the wiki. In short: some parts of GPIOs, UART, I2C, SPI, RCC, Timers and some other basic stuff works and has register definitions (and some convenience functions, but not too many, yet). We're working on adding support for more subsystems, any help with this is highly welcome of course! Luckily ARM stuff (and especially the STM32) has pretty good (and freely available) datasheets.

We have a few simple example programs, e.g. for the Olimex STM32-H103 eval board (see photo). JTAG flashing can be done using OpenOCD, for example.

Feel free to join the mailing lists and/or the #libopenstm32 IRC channel on Freenode.

The current list of projects where we plan to use this library is Open-BLDC (an Open Hardware / Free Software brushless motor controller project by Piotr Esden-Tempski), openmulticopter (an Open Hardware / Free Software quadrocopter/UAV project), openbiosprog (an Open Hardware / Free Software BIOS chip flash programmer I'm in the process of designing using gEDA/PCB), and probably a few more.

If you plan to work on any new (or existing) microcontroller hardware- or software-projects involving an STM32 microcontroller, please consider using libopenstm32 (it's the only Free Software library for this microcontroller family I know of) and help us make it better and more complete. Thanks!

OpenOCD, a Free Software JTAG utility with ARM and MIPS support

JTAG adapter for parallel port

Just FYI, I've recently updated the OpenOCD Debian package in unstable. OpenOCD is a Free Software JTAG utility which currently supports quite a large number of JTAG adapters and various CPUs/targets (many ARM and now also some MIPS ones). It's being used by a number of Free Software related projects such as OpenMoko and many others.

Here's an example of how you usually use the (new) OpenOCD with a cheapo parallel port JTAG device. First, start the OpenOCD server, providing it an interface config file and a target config file (you can copy/adapt them from /usr/lib/openocd/{interface,target}/*.cfg, or use those files directly if they work for your target, of course).

  $ openocd -f parport.cfg -f lpc2148.cfg

Then, in another xterm for example, connect to the now-running OpenOCD telnet server. Here you can now run various commands to probe, control and program the JTAG device(s). Try help for a list of commands. As an example, for flashing a binary onto some LPC2148 eval board you would do something like this:

  $ telnet localhost 4444
  Trying 127.0.0.1...
  Connected to localhost.
  Escape character is '^]'.
  Open On-Chip Debugger
  > reset init
  JTAG device found: 0x4f1f0f0f (Manufacturer: 0x787, Part: 0xf1f0, Version: 0x4)
  srst pulls trst - can not reset into halted mode. Issuing halt after reset.
  target state: halted
  target halted in Thumb state due to debug-request, current mode: Supervisor
  cpsr: 0x800000f3 pc: 0x7fffd2a2
  requesting target halt and executing a soft reset
  target state: halted
  target halted in ARM state due to debug-request, current mode: Supervisor
  cpsr: 0x800000d3 pc: 0x00000000
  > flash write_image /home/foo/program.bin 0
  wrote 1236 byte from file /home/foo/program.bin in 0.533683s (2.261701 kb/s)
  > resume 0

The final resume 0 will start to execute your program on the ARM LPC2148 microcontroller.

Check out the openocd info page (info openocd on the command line) for lots more documentation.

Syndicate content