A simple DLP-USB1232H based JTAG programmer with OpenOCD support

DLP-USB1232H and OpenOCD based JTAG adapter

Here's a quick introduction to using a cheap FTDI FT2232H based module (left-hand side on the photo) as a JTAG programmer together with the OpenOCD JTAG software for ARM and MIPS devices. The module I am using for thіs purpose is a DLP Design DLP-USB1232H, which is available from various sources (Digikey, Mouser, Saelig, and probably others) for 20-30 bucks plus shipping, depending on where you live.

By properly connecting the correct pins of the DLP-USB1232H to the target JTAG
device (I used an Olimex STM32-H103 eval board for testing) you can easily abuse the DLP-USB1232H as JTAG programmer. As I chose the proper DLP-USB1232H GPIOs for the TRST and (S)RST pins, OpenOCD even worked out of the box, without having to change a single line of code.

The only thing that's required is to provide OpenOCD with an interface config file that uses the usbjtag "layout". I have already submitted that config file upstream, I guess it should be merged soonish.

The usage is then pretty simple:

  $ openocd -f interface/dlp-usb1232h.cfg -f board/olimex_stm32_h103.cfg

And in another xterm:

  $ telnet localhost 4444
  > init
  > reset halt
  > flash write_image erase fancyblink.bin 0x08000000
  > reset

This flashes the given fancyblink.bin image onto the STM32-H103 eval board via the DLP-USB1232H JTAG programmer, where fancyblink.bin is an example program from my libopenstm32 project (that aims to create a full-blown firmware library for ST STM32 microcontrollers, similar to what avr-libc does for AVRs). Contributions for libopenstm32 (license is GPLv3 or later) are highly welcome btw., hint hint...

  $ git clone git://

Full schematics, datasheets, and detailed instructions for the JTAG programmer are available from a small page I created in my Random Projects wiki, which is intended for the various smaller projects I'm working on that don't warrant getting their own domain, wiki, etc:

The Random Projects wiki is open-for-all btw, feel free to use it for any freeish, software or hardware projects of your own if you want.

Anyway, the DLP-USB1232H is a really nice device as it can also be used for many other purposes, such as USB-to-Serial or SPI BIOS chip programming, but more on that in another blog post...

Syndicate content